600kw Bogie Hearth Annealing Furnace for Heat Treatment
|FOB Price:||US $5,500-20,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5,500-20,000/ Piece|
|Production Capacity:||100 Units / Year|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: RT2-600-9
- Place Style: Horizontal
- Type: Heat Treatment Furnace
- Fuel: Electrical or Gas
- Operating Temperature: 950ºC
- Rated Voltage: 380V
- Empty Furnace Heating Time: 2.5h
- Furnace Temperature Uniformity: ±7.5
- Weight: 22000kg
- Transport Package: Plastic Film Protection
- Origin: Changzhou
- Certification: CE, ISO
- Range of Applications: Industrial
- Usage: Annealing
- Paint: High Temperature Silver Paint
- Maximum Temperature: 950ºC
- Heating Element Connection Method: Yy
- Temperature Control Accuracy: ±1
- Maximum Load Capacity: 28000kg
- Trademark: bonade
- Specification: 4500mm× 2300mm× 1500mm
- HS Code: 8514101000
Bogie Hearth Annealing Furnace is mainly used for:
High chromium, high manganese steel castings, ductile iron, roll, steel ball, 45 steel, stainless steel and so on
|Heating element connection method||YY|
|Empty furnace heating time||h||2.5||2.5||2.5||3.5||3.5||4||4||4.5|
|Temperature control accuracy||ºC||±1|
|Furnace temperature uniformity||ºC||±7.5|
|Maximum load capacity||Kg||600||1000||2500||4000||9000||8000||12000||28000|
1, the operator must be aware of the maintenance of the following before the car furnace:
A, electric furnace and its auxiliary equipment structure and performance.
B, distribution system, the layout of the control system and the location of the safety device.
C, operating procedures and safe operating procedures.
2, ready to check:
A, check the equipment power supply is normal, whether there is phase, short circuit or bare line and so on.
B, check the grounding device wiring contact is good.
C, check whether the heating element is damaged, the contact at the connection is good, whether it is in contact with the furnace and the shell.
D, check the temperature control system is abnormal phenomenon.
E, check the door lift, trolley running out of normal.
3, with corrosive, volatile, explosive gas is strictly prohibited into the workpiece processing, so as not to affect the heating element and refractory life and cause an explosion and other accidents.
4, electric furnace shall not be over-temperature operation, otherwise it will shorten the service life of the equipment.
5, too much of the scale of the workpiece into the furnace before the need to clear the brush can be used under the wire.
6, the workpiece evenly stacked, from the heating element should be around 100-150mm.
7, is strictly prohibited barbaric operation, the workpiece should be light to avoid the impact.
8, electric stove when the operator is not allowed to leave the post, you must always pay attention to the work of the furnace is normal.
9, electric furnace in the loading and unloading of the workpiece, you must first cut off the heating element power supply to ensure the safety of the operator.
10, the furnace of the oxide (including electric furnace wire) should be cleaned up, at least once a week or five times a time. Under the bottom of the furnace can be compressed air blowing.
11, the resistance wire, such as after use, you can not hit the bend, so as not to break.
A, electric furnace motor to be regularly checked, add lubricants, etc., pay attention to the use of safety.
B, the drive shaft must always check the addition of lubricants to prevent damage to the shaft due to lack of oil.
C, regularly check the use of heating components.
D, regularly check the instrument, the use of thermocouple to prevent the instrument, thermocouple error caused by incorrect temperature measurement.